JP to US Unisex Rings Size Chart
This chart converts unisex rings sizes from Japanese (JP) to United States (US), covering 24 sizes from JP 4 to JP 30. Each row shows the direct equivalent so you can find your size at a glance.
Whether you are shopping online from a united states retailer or trying to interpret a foreign size label, this conversion chart gives you the mapping you need. The conversions below follow industry-standard sizing used by major brands, though individual brands may vary slightly.
Quick Converter
| JP | US |
|---|---|
| 4 | 3 |
| 5 | 3.5 |
| 7 | 4 |
| 8 | 4.5 |
| 9 | 5 |
| 10 | 5.5 |
| 11 | 6 |
| 12 | 6.5 |
| 13 | 7 |
| 14 | 7.5 |
| 15 | 8 |
| 16 | 8.5 |
| 17 | 9 |
| 18 | 9.5 |
| 19 | 10 |
| 20 | 10.5 |
| 22 | 11 |
| 23 | 11.5 |
| 24 | 12 |
| 25 | 12.5 |
| 26 | 13 |
| 27 | 13.5 |
| 28 | 14 |
| 30 | 15 |
How to Measure Your Rings Size
Wrap a thin strip of paper or a flexible measuring tape around the base of the finger you plan to wear the ring on. Mark where the strip overlaps, then measure the length in millimetres — that is your inner circumference. Alternatively, measure the inner diameter of a ring that already fits well. Measure at the end of the day when fingers are slightly swollen, and try the widest knuckle the ring must pass over.
Understanding JP and US Sizing
Japanese (JP) sizes are based on centimetre measurements. For footwear, the JP size equals the foot length in centimetres, making it one of the most intuitive sizing systems in the world. For clothing, JP sizes tend to run smaller than Western equivalents because they are cut to Japanese body proportions. Always measure in centimetres when shopping with JP sizing.
The US sizing system is the standard in the United States and is used by most American brands. US sizes are typically numbered and can differ significantly from European or Asian systems. Most US retailers display sizes prominently on labels and online, but the underlying measurements (in inches or centimetres) vary between brands, so treating US sizes as approximate is safest.
Tips for Converting Unisex Rings Sizes
Japanese ring sizes run from 1 to 30 and are based on the inner circumference in millimetres (offset from zero). A US 7 is approximately a JP 14.
Ring size can change with temperature, time of day, and hydration level. Measure at the end of the day in a warm room for the most representative result.
If you are buying a surprise ring (for an engagement, for example), try to borrow one of the recipient's existing rings and measure its inner diameter — this is more reliable than guessing.
Wide-band rings (over 6 mm) feel tighter than narrow-band rings of the same size. Consider going up half a size for comfort if choosing a wider band.
Quick Reference
Quick reference: JP 4 = US 3, JP 17 = US 9, and JP 30 = US 15. The full chart above covers all 24 sizes in this range.
This unisex data is also available in UK, EU, CN sizing. Use the converter tool above to switch between any pair of systems instantly.
Frequently Asked Questions
- How do I convert JP unisex rings sizes to US?
- Use our JP to US unisex rings size chart above. Find your JP size in the left column and read across to find the US equivalent. For example, JP size 17 equals US size 9.
- What is JP size 17 in US for unisex rings?
- JP size 17 in unisex rings is equivalent to US size 9. This is a standard conversion used across most major brands, though fit can vary slightly between manufacturers.
- Are JP and US unisex rings sizes the same?
- No, JP and US use different numbering systems for unisex rings. The numbers do not match directly — for example, JP 4 corresponds to US 3, not US 4. Always use a conversion chart rather than assuming the sizes are equivalent.
- What size range does this unisex chart cover?
- This chart covers 24 sizes, from JP 4 (US 3) to JP 30 (US 15). Click any size in the chart for a detailed individual conversion page.
- How accurate are these unisex rings size conversions?
- These conversions follow the industry-standard mapping used by major brands and international sizing organisations. However, individual brands may size slightly differently — a JP 17 in one brand might fit like a JP 16 in another. When possible, check the specific brand's size chart.
- What if I am between two unisex rings sizes?
- If you fall between two sizes, the general advice is to size up for comfort, especially for rings with a wider band. You can also check whether the brand offers half sizes or fits that run large or small.
- Can I use this chart for all unisex brands?
- This chart provides the standard JP to US conversion for unisex rings. Most mainstream brands follow this sizing closely, but some brands are known to run large or small. If accuracy is critical — for example, when ordering online with no option to try on — check the brand's own size chart alongside our conversion.